Crown Raising, in plain language.

Crown raising is removing a tree's lower branches to lift the canopy and open clearance for people, vehicles, buildings or a view. It changes how high the branches start, not how tall the tree stands.

A crown-raising description needs a height and the thing that height clears

The USDA Forest Service's glossary defines crown raising as a method of pruning that provides clearance for pedestrians, vehicles, buildings, lines of sight and vistas by removing lower branches. NC State Extension's glossary describes the same work as the removal of low branches to produce a taller, clear trunk that increases access under the canopy, and its pruning guide has nursery or landscape professionals removing lower branches to obtain clearance for equipment and for human or vehicular traffic.

The Maryland Forest Service's tree-expert study guide calls crown raising the selective removal of branches to provide vertical clearance, and says the location and size range of the parts to be removed should be specified and the clearance distance shall be specified. A quote that says only to raise the crown or lift the tree names neither the height of the lowest remaining branches nor what that height is measured over. Naming the thing cleared (the roof, the drive, the walk, the street or the yard under the tree) and the branches meant, by side of the tree or by what they hang over, is what makes the description checkable, because the same words can cover very different amounts of wood.

The tree trimming cost guide names what moves a trimming quote. Limbs hanging over a roof are a separate question, answered on the roof-limb answer page. Crown thinning and crown reduction are two other kinds of crown work, and crown defines the word itself.

Sources for the definition

How much clearance, and over what?

Asked and answered

Questions people actually ask.

Is there a standard clearance height for a yard?

No source read on crown raising gives a standard clearance height for a yard. The NC Forest Service's example specification for term tree-work contracts does pair heights with named surfaces for trees 13 inches or greater in diameter at breast height: 15 feet over the street, 10 feet over the sidewalk and under the canopy, and 10 feet over and from the side of permanent structures. The specification calls its figures guidelines, so they are one example contract's numbers and not a figure for any yard.

Who sets the clearance height over a street or sidewalk?

Often a town. The USDA Forest Service says the clearance for street trees is often specified by municipal ordinance, and NC State Extension says most cities have ordinances that require certain height clearance above a road and the sidewalk. Which height applies on a particular street is a question for the office that governs that street.

Does crown raising remove every low branch?

No. In the Maryland Forest Service's study guide the work is selective, and the location and size range of the parts to be removed should be specified, so the description should say which branches go.

Is crown raising used to open a view?

Yes, among other purposes. The USDA Forest Service lists lines of sight and vistas among the reasons for removing lower branches, and NC State Extension's woodland-owner note says crown raising can expose scenic vistas.

Get a quote

Say where the branches hang and what has to pass beneath.

Request a Quote

Faster answer: call (336) 963-8330. The line is on 24 hours a day.

Related work