Rigging, in plain language.

Rigging is the system of ropes, blocks and friction devices, tied off at rigging points, that lowers a cut piece of a tree instead of letting it drop. The word names the gear and its setup, not the cut that frees the piece.

A rigging system is rope, blocks, a friction device and a place to tie off

Michigan's FACE program, in its report on one tree job, describes a rigging system built from rope, arborist's blocks and pulleys, and a friction device. The report calls it desirable to design a rigging system that minimizes friction and reduces forces on the tree, with the rigging points positioned to permit more rope in the system to reduce the shock load. It lists the advantages of pulleys over natural crotches as reduced friction and forces on branches and direction of the load over the landing zone.

Michigan's FACE report also calls ground workers an essential component of a rigging operation: they help set up the friction devices, run lines, detach ropes and send equipment and lines up to the climber.

The NC Forest Service and California give two different tests for lowering a piece instead of dropping it

The NC Forest Service's example specification for term tree-work contracts says trees or limbs being removed that are "large enough to cause hardscape or structural damage on impact" shall be lowered using roping and rigging techniques. It is an example, not a statute, and it ties lowering to the damage a landing would do.

California's tree work safety order sets a different test, saying separate ropes for lowering limbs "shall be attached to limbs which cannot be dropped or are too heavy to be controlled by hand". That is a regulation for California employers, cited for its wording only. OSHA's hazard bulletin on tree care lists, among the things employers need to do before beginning any tree care operation: "Determine if rigging is necessary and, if so, that workers can use it safely".

Whether a given tree can take the strain of rigging at all is answered at the tree, by someone who examines it. The page on dead and rotten trunks argues why rotten wood is the hard case, the climber-or-crane page compares ropes with a crane, and the removal cost guide shows how rigging moves a quote.

Sources for the definition

What does each piece have to miss?

Asked and answered

Questions people actually ask.

Is a rigging point a piece of hardware?

Not in the USDA Forest Service's definition. Its National Tree Climbing Guide defines a rigging point as "the point where a rope is tied off to an object", which names a place rather than a piece of hardware. Which place a crew uses on a particular tree, and whether the wood there can hold, is settled at that tree.

Does a sling count as rigging?

In one OSHA construction section, yes: its title is "Rigging equipment for material handling" and it covers slings. That is vocabulary, not a statement about what governs a tree crew, and the tree-work sources read on rigging do not say whether a sling is rigging. The grapple entry sets a sling beside jaws that grip.

Is California's rule on lowering ropes binding in North Carolina?

No. California's tree work safety order is a California regulation for California employers, cited here only for its wording. No North Carolina rule is quoted in the rigging entry; the safety agency over a particular employer decides which rules cover that employer.

How should a quote describe the rigging?

Nothing in the sources read on rigging sets the wording of a quote. NC State Extension's guide to hiring a tree care professional lists a clear statement of the work to be done among the items a contract should include, so the plain step is to ask the company what its description of the work covers on your lot.

Get a quote

Describe the roof, fence, wires and beds around the tree.

Request a Quote

Faster answer: call (336) 963-8330. The line is on 24 hours a day.

Related work