Drop Zone, in plain language.

A drop zone is the area beneath tree work where cut pieces come down, set up so people stay clear while work goes on overhead. The term gives no size, and other sources call a similar area by other names.

OSHA's advice and California's rule both keep people out until the area is called safe

OSHA's hazard bulletin on tree care uses "drop zone" for the tree-trimming area. Among its steps to protect workers from falling objects, it lists establishing and marking drop zones with equipment such as cones where objects may fall. It also says the communication system must tell employees beneath overhead tree workers when to stand clear of the drop zone and when it is safe to approach one.

California defines a drop zone as the area a qualified tree worker establishes beneath employees aloft in tree work operations and/or where the potential exists for struck-by injuries from objects dropped or lowered from above. Its tree work safety order says a drop zone shall be set up before pruning or removal begins, that employees not directly involved stay out until a qualified tree worker directly involved in the operation says it is safe to enter, and that only qualified tree workers directly involved in the operation are permitted in it while a load hangs from a rigging system. That order binds California employers; it appears here for its vocabulary.

A homeowner may meet the term drop zone when a quote or a walk-through describes where cut pieces will come down. The Forsyth County page speaks to a lot with no open ground, what a planned crane job needs from a property is laid out on the crane access page, and which storm hazards to leave alone is the subject of the page on what not to touch.

Sources for the definition

How much open ground is near your tree?

Asked and answered

Questions people actually ask.

How big is a drop zone, and who sets it?

None of the definitions or rules read on drop zones gives a size. OSHA's bulletin lists setting up and marking drop zones, California's rule says a drop zone shall be set up before pruning or removal begins, and California's definition says a qualified tree worker sets it up. The same OSHA bulletin separately lists a distance for ground workers to maintain from tree-felling operations, which it does not give as the size of a drop zone. The size on a given job comes from the people planning that job, working from the tree and what surrounds it.

Is a drop zone the same as a landing zone or a fall zone?

No. The three names overlap but are defined by different sources. New Jersey's FACE program, in a report on one tree job, calls the ground under the tree where branches and debris land the landing zone. OSHA's construction crane standard, which does not cover tree trimming and tree removal work, defines a fall zone as the area where suspended materials could foreseeably fall in an accident. Drop zone is the name in OSHA's bulletin and California's rule.

Is a drop zone required by law in North Carolina?

The sources read on drop zones do not say a drop zone is required by law in North Carolina, and none of them is a North Carolina rule. OSHA's bulletin says of itself that it is not a standard or regulation and creates no new legal obligations, though it also describes mandatory standards; California's drop zone rule binds California employers; and the construction crane standard excludes tree work. Which rules cover a particular crew is a question for the safety agency over that employer.

How is a drop zone marked?

OSHA's bulletin gives cones as its example of equipment for marking a drop zone. The New Jersey FACE report says that, if necessary, the landing zone should be physically marked, such as by using construction cones or some other markers at the perimeter of the work zone. Cones are an example in both, not a requirement in either.

Get a quote

Include the yard, the drive and whatever else borders the tree.

Request a Quote

Faster answer: call (336) 963-8330. The line is on 24 hours a day.

Related work