Sectional Takedown, in plain language.
Sectional takedown is the trade's name for removing a tree in pieces, working from the top down, instead of cutting it down in one piece. It describes a method; it does not say that a given tree needs it.
What stands around the tree is a reason to take it down in pieces
A tree cut down in one piece comes down all at once, and everything in its path takes the landing. A roof, a fence, a wire or a neighbor's bed in that path is the kind of thing that sends a crew to work from the top down instead, so that each piece can be lowered or lifted to a chosen spot. California's definitions describe felling as cutting down "an entire tree or standing section of a tree in one piece, from the ground"; a sectional takedown is the other approach, with the pieces taken from aloft.
California's tree work safety order separately calls for lowering devices, such as block and tackle and rope, when there is a danger that a tree being removed may fall in the wrong direction or damage property. That order binds California employers and is cited for its wording only; it speaks of a tree's fall and the property near it, not of a method by name.
How the pieces are lowered or lifted is worked through on the crane-or-climber page, and the rigging entry sets the NC Forest Service's test for when a piece is lowered beside California's. The tree removal service page describes the work as the company offers it, and the removal cost guide lists what is underneath a tree among the drivers of a removal quote.
Sources for the definition
Primary sources, checked November 14, 2026.
What stands around the tree you want removed?
Questions people actually ask.
Does a tree come down in pieces only when a crane is used?
No. Pieces can be lowered on ropes or lifted away by a crane, and either way the tree comes down in pieces instead of whole. How a crew chooses between the two is the subject of the Crane or Climber page.
Is a sectional takedown safer than cutting a tree down in one piece?
None of the sources read on sectional takedown says it is safer than cutting a tree down in one piece. They describe the method and the conditions around it, and none ranks one against the other. Property in the tree's path, and whether the wood can take the strain of lowering, are two things they point to, and both are judged at the tree.
Who decides whether a tree can be taken down in pieces?
The person who examines that tree decides. California's tree work safety order, a regulation for California employers cited here for its wording, says that when branches or sections of a tree that will be removed have to be taken off, a qualified tree worker who is trained and experienced in rigging operations "shall determine whether the tree can withstand the strain of the lowering procedures", and that if the tree cannot, "other means of removing the tree shall be considered". No page can answer that from a description.
Do safety agencies call it a sectional takedown?
Not in the US sources read on sectional takedown. OSHA's hazard bulletin on tree care speaks of rigging operations for piecing out the tree, and the UK Health and Safety Executive's tree climbing page uses the name sectional felling. Sectional takedown is the trade's word for taking a tree down in pieces.